Tech

How to Use Your Old iMac as a Monitor

Some iMacs can act as displays for other Macs

27-inch iMacs released in late 2009 included the first version of Target Display Mode, a feature that allowed iMacs to be used as displays for other Apple devices. However, when Apple released the 2014-2015 Retina Display iMacs, it no longer supported this feature.

If you have one of the iMacs with Target Display Mode, your Mac mini or another Mac can use your old 27-inch iMac as a display.

Target View is only available on select iMacs manufactured between late 2009 and late 2013.

What to do with an old iMac?

10 Things to Know When Buying an Old, Used Mac

What you need to use your iMac as a monitor

Display-compatible 27-inch iMacs have a bi-directional Mini DisplayPort or Thunderbolt port (depending on model). You need the appropriate ports and cables to connect two Macs. The iMac used as the display must be running macOS High Sierra (10.13.6) or earlier. The source Mac must have macOS Catalina (10.15) or earlier installed.

compatible iMacs

The iMac no longer supports Target Display Mode, but many models sold from late 2009 to 2014 do.

iMac model*

door type

Mac font compatible*

2009 – 2010 27-inch iMac

Mini DisplayPort

Mac with Mini DisplayPort or Thunderbolt

2011 – 2014

Ray

Mac with Thunderbolt

2014 – 2015 iMacs Retina

Ray

No target view support

How to open and close target view

If you have a suitable iMac model, suitable cables, and specified operating system, you can configure Target Display Mode. See how:

Turn on the iMac to be used as the monitor and the Mac to be the source.

Connect two Macs with a Mini DisplayPort cable or Thunderbolt cable.

Connection usually happens automatically, but if your iMac doesn’t automatically enter target display mode, command+F2 To manually enter the target view, on your iMac, the iMac displays the onscreen content of the source Mac.

When you’re ready to exit the target view, press the button to turn the feature off manually. command+F2 keyboard combination or disconnection of the iMac from the source Mac.

What to do if target view is not working

If the target view is not working as expected, try the following to help establish the connection.

to use command+fn+F2. This may work for some keyboard types.

Make sure the Mini DisplayPort or Thunderbolt cable is properly connected.

If the iMac used as the monitor boots from a Windows volume, reboot from the Mac’s regular boot drive.

If you’re signed in to the iMac you intend to use as the monitor, sign out and return to the normal sign-in screen.

Some 3rd party keyboards, command+F2 correctly. Use another keyboard or the original keyboard that came with your Mac.

Things to consider

  • The iMac will continue to run the operating system and any applications open when it enters the target view.
  • When in target view, only the keyboard brightness, sound, and target view key combinations are active. Other keyboard inputs are ignored. Inputs other than USB, FireWire, and keyboard are also ignored.
  • The source Mac cannot use any of the display features of the iMac, including the built-in iSight camera.
  • Target View can be useful in many situations, but it’s not a full-time replacement for having a dedicated display for another Mac.

Should you use your iMac as a monitor?

Of course, if a temporary need arises, why not? But in the long run, there’s no point in wasting an iMac’s computing power, and it doesn’t make sense to pay for the power the iMac needs to operate while only using the display. Remember, the rest of the iMac is still working behind the scenes, consuming electricity and generating heat.

If you need a big screen for your Mac, get a 27-inch or larger computer monitor. It doesn’t have to be a Thunderbolt display; Almost any display with DisplayPort or Mini DisplayPort will work fine.

The 7 Best 27-inch LCD Monitors of 2022

Using multiple iMacs as monitors

It’s possible to use more than one iMac as a display, as long as all Macs (both the display iMacs and the source Mac) are using the Thunderbolt connection.

Every iMac used as a display has simultaneous connected displays supported by the Mac you are using as the source.

Maximum connected Thunderbolt display

Match

Number of Views

MacBook Air (Mid 2011)

one

MacBook Air (Mid 2012 – 2014)

two

13-inch MacBook Pro (2011)

one

MacBook Pro Retina (Mid 2012 and later)

two

15-inch MacBook Pro (Early 2011 and later)

two

17-inch MacBook Pro (Early 2011 and later)

two

Mac mini 2.3 GHz (Mid 2011)

one

Mac mini 2.5 GHz (Mid 2011)

two

Mac mini (late 2012 – 2014)

two

iMac (Mid 2011 – 2013)

two

iMac 21.5-inch (Mid 2014)

two

Mac Pro (2013)

6

How to Set Up Dual Monitors on Mac

Common questions

  • Why has Apple removed Target Display Mode from newer iMacs?

    With the release of Retina 5K iMacs in 2014, the resolution of the iMac has increased so much that at least two Thunderbolt ports are required to connect a display. Apple decided that this was too many ports, so instead of increasing bandwidth on each port, they silently disabled Target Display.

  • When will Target Display mode return?

    Probably never. Mac users were hoping to make a comeback with the iMac M1, which includes more Thunderbolt ports, but Target Display Mode hasn’t been on any iMac since late 2014. And now that Apple has shelved the spec article, it’s pretty safe to say. forever.

Was this page helpful?

Thanks for letting us know!

Get the latest tech news delivered every day






Something went wrong. Please try again.

You are inside! Thanks for being a member.

Something went wrong. Please try again.

Thanks for being a member!

Tell us why!






See more

How to Use Your Old iMac as a Monitor

Some iMacs can pull double duty as a monitor for other Macs

The 27-inch iMacs introduced in late 2009 included the first version of Target Display Mode, a feature that allowed iMacs to be used as displays for other Apple devices. However, by the time Apple released the 2014-2015 Retina Display iMacs, they no longer supported the feature.

If you have one of the iMacs with Target Display Mode, your Mac mini or another Mac can make use of your old 27-inch iMac as a display.

Target Display Mode is only available on specific iMacs made between late 2009 and 2013.
What to Do With an Old iMac
10 Things to Know When Buying an Old, Used Mac
What You Need to Use Your iMac as a Monitor

Display mode-compatible 27-inch iMacs have either a bi-directional Mini DisplayPort or a Thunderbolt port (depending on the model). You need the proper ports and cables to make the connection between the two Macs. The iMac used as a display must be running macOS High Sierra (10.13.6) or earlier. The source Mac must have macOS Catalina (10.15) or earlier installed.

Compatible iMacs

The iMac no longer supports Target Display Mode, but several models sold in late 2009 through 2014 support the feature.

iMac Model *

Port Type

Compatible Mac Source*

2009 – 2010 27-inch iMac

Mini DisplayPort

Mac with Mini DisplayPort or Thunderbolt

2011 – 2014 iMac

Thunderbolt

Mac with Thunderbolt

2014 – 2015 Retina iMacs

Thunderbolt

No Target Display Mode support

How to Enable and Disable Target Display Mode

If you have a suitable iMac model, appropriate cables, and the specified operating system, you can set up Target Display Mode. Here’s how:

Turn on the iMac that will be used as the display and the Mac that will be the source.

Connect the two Macs with either a Mini DisplayPort cable or a Thunderbolt cable.

The connection typically happens automatically, but if your iMac doesn’t automatically enter Target Display Mode, press Command+F2 on the iMac to manually enter Target Display Mode. The iMac displays the screen contents of the source Mac.

When you are ready to exit Target Display Mode, manually turn off the feature by pressing the Command+F2 keyboard combination or by disconnecting the iMac from the source Mac.

What to Do If Target Display Mode Doesn’t Work

If Target Display Mode isn’t functioning as expected, try these things to help make the connection.

Usie Command+Fn+F2. This may work for some keyboard types.

Make sure the Mini DisplayPort or Thunderbolt cable is connected correctly.

If the iMac being used as a display is currently booted from a Windows volume, restart it from the normal Mac startup drive.

If you’re currently logged in to the iMac you intend to use as a display, log out and return to the normal login screen.

A few third-party keyboards don’t send the Command+F2 correctly. Use another keyboard or the original keyboard that came with your Mac.

Things to Consider
The iMac will continue to run its operating system and any applications that were open when it entered Target Display Mode.
While in Target Display Mode, only the keyboard’s display brightness, volume, and Target Display Mode key combinations are active. Any other keyboard input is ignored. USB, FireWire, and inputs other than the keyboard are also ignored.
The source Mac can’t make use of any of the display iMac’s features, including the built-in iSight camera.
Target Display Mode can be helpful in many situations, but it’s not a full-time substitute for having a dedicated display for another Mac.
Should You Use Your iMac as a Display?

If a temporary need arises, sure, why not? But in the long run, it just doesn’t make sense to waste the computing power of an iMac, nor does it make sense to pay for the energy the iMac needs to run when you’re only using the display. Remember, the rest of the iMac is still running behind the scenes, consuming electricity and generating heat.

If you need a large display for your Mac, grab a decent 27-inch or larger computer monitor. It doesn’t need to be a Thunderbolt display; almost any monitor with a DisplayPort or Mini DisplayPort will work well.

The 7 Best 27-Inch LCD Monitors of 2022
Using Multiple iMacs as Displays

It’s possible to use more than one iMac as a display provided all the Macs—both the iMacs used for display and the source Mac—are using Thunderbolt connectivity.

Each iMac used as a display counts against the simultaneously connected displays supported by the Mac you’re using as the source.

Maximum Connected Thunderbolt Displays

Mac

Number of Displays

MacBook Air (Mid 2011)

1

MacBook Air (Mid 2012 – 2014)

2

MacBook Pro 13-inch (2011)

1

MacBook Pro Retina (Mid 2012 and later)

2

MacBook Pro 15-inch (Early 2011 and later)

2

MacBook Pro 17-inch (Early 2011 and later)

2

Mac mini 2.3 GHz (Mid 2011)

1

Mac mini 2.5 GHz (Mid 2011)

2

Mac mini (Late 2012 – 2014)

2

iMac (Mid 2011 – 2013)

2

iMac 21.5-inch (Mid 2014)

2

Mac Pro (2013)

6

How to Set Up Dual Monitors on a Mac
FAQ

Why did Apple remove Target Display Mode from newer iMacs?
With the launch of Retina 5K iMacs in 2014, the iMac’s resolution increased so much that it would take at least two Thunderbolt ports to turn on a monitor. Apple decided this was too many ports, so instead of increasing the bandwidth in each port, they quietly disabled the Target Display feature. 

When will Target Display mode return?
Probably never. Mac users hoped for the return with the M1 iMac, which included more Thunderbolt ports, but the Target Display Mode hasn’t been on any iMacs since late 2014. And now that Apple has archived its article about the feature, it’s pretty safe to say it’s gone forever.

Was this page helpful?

Thanks for letting us know!

Get the Latest Tech News Delivered Every Day
Email Address
Sign up
There was an error. Please try again.
You’re in! Thanks for signing up.
There was an error. Please try again.
Thank you for signing up!

Tell us why!
Other
Not enough details
Hard to understand

Submit

#iMac #Monitor


Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Back to top button